Free shipping relay module Solid state three-phase motor and reversing control TSR-1KW-Z

 

A. The characteristics of three-phase motor and reversing control module products 1) proprietary technology, the domestic advanced. (2) the blocking voltage up to 2000 v above. (3) when used to match the appropriate radiator, if necessary, to strengthen the forced air cooling. (4) the built-in input electronic interlock function. (5) thyristor output, zero current turn off, the instantaneous withstand overload ability. 6. Use: dedicated to three-phase induction motor and reversing control. 2. Three-phase motor and reversing control module product overview This is a new type of three-phase motor and reversing control special solid state relay, can be used to switch power of three-phase induction motor within 9 kilowatts. Built-in electronic circuit can effectively prevent the lock at the same time of solid state relay and reversing switch at the same time conduction, when put through a steering error on another shift, motor stop running. LED light-emitting diode display of three-phase motor, green said, red inversion. Output using the parallel thyristor chip technology and built-in varistor overvoltage absorbing circuit, has high overvoltage withstand, best reliability. Three-phase two point: the two terminals in positive and negative switch phase SCR within another terminal with short route straight through. Solid state relay when use advice with proper radiator and semiconductor dedicated fast fuse, and install temperature limit in temperature control switch in the radiator. 3. The following is a three-phase motor and reversing control module parameters: Type no. (TSR) - 1 kw - Z (TSR) - 2 kw - Z (TSR) - 3 kw - Z (TSR) - 5 kw - Z (TSR) - 7 kw - Z (TSR) - 9 kw - Z Working voltage 10-30 VDC input parameters The control voltage 10 to 30 VDC automatically More than 40 ma control current manual Manual (external 10 to 30 VDC power supply) Output parameters of the output voltage is 380 VDC The rated working current 1 kw, 2 kw, 3 kw, 5 kw, 7 kw, 9 kw, State pressure drop 1.5 V or less The minimum current flow 50 ma Off state leakage current Less than 10 ma, The performance parameters Medium pressure 2500 vac, 1 minute Insulation voltage 2500 v or higher Insulation resistance Ω 100 m or higher Working temperature - 35 ~ 70 Power frequency 50/60 hz Can match the radiator cooling conditions: YS - S1, YS - S2, YS - S3, the former two can pack fan Load current safety factor 1 kw or less. 2 kw, 3 kw, 5 kw. 7 kw. 9 kw. Above is less than the nominal value Overall dimensions 105 l * 74 w * h The weight of 330 g     Four. Three-phase motor and reversing control module overall dimensions and installation wiring diagram: (unit: mm)       A. The characteristics of three-phase motor and reversing control module products 1) proprietary technology, the domestic advanced. (2) the blocking voltage up to 2000 v above. (3) when used to match the appropriate radiator, if necessary, to strengthen the forced air cooling. (4) the built-in input electronic interlock function. (5) thyristor output, zero current turn off, the instantaneous withstand overload ability. 6. Use: dedicated to three-phase induction motor and reversing control. 2. Three-phase motor and reversing control module product overview This is a new type of three-phase motor and reversing control special solid state relay, can be used to switch power of three-phase induction motor within 9 kilowatts. Built-in electronic circuit can effectively prevent the lock at the same time of solid state relay and reversing switch at the same time conduction, when put through a steering error on another shift, motor stop running. LED light-emitting diode display of three-phase motor, green said, red inversion. Output using the parallel thyristor chip technology and built-in varistor overvoltage absorbing circuit, has high overvoltage withstand, best reliability. Three-phase two point: the two terminals in positive and negative switch phase SCR within another terminal with short route straight through. Solid state relay when use advice with proper radiator and semiconductor dedicated fast fuse, and install temperature limit in temperature control switch in the radiator. 3. The following is a three-phase motor and reversing control module parameters: Type no. (TSR) - 1 kw - Z (TSR) - 2 kw - Z (TSR) - 3 kw - Z (TSR) - 5 kw - Z (TSR) - 7 kw - Z (TSR) - 9 kw - Z Working voltage 10-30 VDC input parameters The control voltage 10 to 30 VDC automatically More than 40 ma control current manual Manual (external 10 to 30 VDC power supply) Output parameters of the output voltage is 380 VDC The rated working current 1 kw, 2 kw, 3 kw, 5 kw, 7 kw, 9 kw, State pressure drop 1.5 V or less The minimum current flow 50 ma Off state leakage current Less than 10 ma, The performance parameters Medium pressure 2500 vac, 1 minute Insulation voltage 2500 v or higher Insulation resistance Ω 100 m or higher Working temperature - 35 ~ 70  Power frequency 50/60 hz Can match the radiator cooling conditions: YS - S1, YS - S2, YS - S3, the former two can pack fan Load current safety factor 1 kw or less. 2 kw, 3 kw, 5 kw. 7 kw. 9 kw. Above is less than the nominal value Overall dimensions 105 l * 74 w * h The weight of 330 g Four. Three-phase motor and reversing control module overall dimensions and installation wiring diagram: (unit: mm) Temperature curve: Five. Solid state relay product selection considerations when choosing products, should be based on the nature of the load is different, have different allowance on the current class. (resistance load, may according to the load current to select 2-3 times. The inductive or capacitive load, load current selection according to 3-5 times). 's relations, according to the load current and temperature when the environment temperature is higher or poor heat dissipation condition. Should increase the current capacity. For the requirement of load short circuit, when used in the load circuit concatenated with the product of the corresponding fast break switch or fuse quickly. Low perceptual load, should be on the output side and varistor, when the overvoltage in case damage the thyristor. Varistors (MOV) matching: 240 v file when selected 430-470 - v, 440 v file when selected 680-750 - v, 660 v when selected 1100-1200 - v. When installation, requirements between the radiator and the product interface must level off, smooth, and uniform on the surface coated with a layer of thermal conductive silicone, then will set of flat washer, spring washer on symmetric tighten screw fixation. Low after the solid state relay work downtime for the first time, while its still remaining to tighten the set screw, so that the solid state relay base plate and the radiator surface can close contact, to achieve the best cooling effect. Different types of solid state relay its nominal current is in the environmental temperature for the nominal current when 40 degrees Celsius, so heat to fully!!!!!