433MHz TELCOMA EDGE 2 4 Garage Door Remote Control Wireless Transmitter For Access Commands | Безопасность и

433MHz TELCOMA EDGE 2, EDGE 4 garage door remote control wireless remote transmitter for access control commands

Compatible Model:

TELCOMA EDGE2
TELCOMA EDGE4

Specifications:

1. Type of programming: Sely copy
2. Material : ABS & Metal
3. Frequency : 433.92MHz. 433MHz
4. Code:Fixed code
5. Buttons : 4
6. Battery: 12V 27A With battery

How to program the remote:

Please note, this remote should copy from your original remote, you should have have workable remote control on hand, then you can make the copy, if your original remote is lost, then please don't buy it.

The programming procedure is as below:

Step:1:Clear the history code from duplicator

1:Press button A and B continuously until LED flash 3 times

2.Release button B (Keep pressing button A),and press button B Slowly for 3 times,LED flash

3.Release button “A”,finish code clearance.

Step 2,Copy code from original remote control

1.Put duplicator aside of original transmitter,as close as possible.

2.Press and hold button A of original transmitter,then press and hold button A of duplicator until you see the duplicator’s LED flash

3.Release both buttons,finish code copy,copy other button in same way.

Button A= lock button Button B=unlock button

If you can not copy it well, please be patient and repeat the above steps and try it again

Include

1 x Remote Control
1 x Battery
1 x Keychain
1 x English Manual